Art.nr: 122-994

Faucet mount chrome - For wall mixer with concealed piping

Chrome faucet mount for installation of wall mixer. 12/15 copper pipes. För kopparrör 12/15 mm (0.6 in.).
945 kr (NOK)
Online 3 in stock
Store - Karlavägen 7, Stockholm 3 in stock

Bestill på nett.
Få varene levert eller hent i Oslo

Vi har foreløpig ikke salg over disk. Du kan bestille på nett og få varene levert som vanlig med Bring, eller hente på lageret i Oslo. Vi gir deg beskjed når bestillingen er klar til henting.

Henting i Oslo

Hentelageret åpner torsdag 17. september.

Slik henter du

  • Bestill i nettbutikken og velg henting i Oslo i kassen.
  • Henting er kun tilgjengelig for varer som er på lager i Oslo.
  • Vent på e-posten som bekrefter at bestillingen er pakket og klar for henting.

Du kan bestille med hjemlevering som vanlig. Bestillinger som allerede er lagt inn, kan ikke endres til henting i Oslo.

Her finner du oss

Maridalsveien 87, i Mølla ved Akerselva.
Kom gjerne innom for råd og veiledning.

Åpningstider

Mandag–fredag kl. 10–18
Lørdag kl. 11–16

Wall mixers are usually installed on mixer plates, which are subsequently attached to the wall. In Europe, the standard is usually 150 c/c, but in Sweden, this standard is 160 c/c. With new piping, it's easier to use tubes with the right dimensions and then use simple mixer attachments. 

These attachments are sold in pairs with chrome caps. The caps can be replaced with the caps that come with the mixer. Note: around 1 cm of thread will be visible between the hood and the mixer fixing nut (image 2). To make the thread blend in with mixers with another finish, you could buy a matching paint and brush (or spray) the thread.

The caps are also available for 16 mm PEX pipes, Alupex, and Pb-tube. See below under "Related Products".

  • ✓ We ship world wide!
  • ✓ 30 days return policy
  • ✓ Personal support