Art.nr: 105-008

Linseed Oil - Floor Oil 1 L

1-liter linseed oil especially suitable for floors.
320 kr (NOK)
Online 10 available
Store - Karlavägen 7, Stockholm 6 available

Bestill på nett.
Få varene levert eller hent i Oslo

Vi har foreløpig ikke salg over disk. Du kan bestille på nett og få varene levert som vanlig med Bring, eller hente på lageret i Oslo. Vi gir deg beskjed når bestillingen er klar til henting.

Henting i Oslo

Hentelageret åpner torsdag 17. september.

Slik henter du

  • Bestill i nettbutikken og velg henting i Oslo i kassen.
  • Henting er kun tilgjengelig for varer som er på lager i Oslo.
  • Vent på e-posten som bekrefter at bestillingen er pakket og klar for henting.

Du kan bestille med hjemlevering som vanlig. Bestillinger som allerede er lagt inn, kan ikke endres til henting i Oslo.

Her finner du oss

Maridalsveien 87, i Mølla ved Akerselva.
Kom gjerne innom for råd og veiledning.

Åpningstider

Mandag–fredag kl. 10–18
Lørdag kl. 11–16

Ädel Floor Oil is made from carefully selected, highly refined fatty acids derived from linseed oil. The oil provides long-lasting protection against moisture and dirt while preserving the natural feel of the wood.

Application Instructions

  1. Apply the warm oil generously to the floor using a brush. A wide wallpaper brush is suitable for this task. Where the wood absorbs the oil, apply more until the wood is fully saturated. The technique is to continuously move oil from areas that no longer absorb it to areas that still do.
  2. Allow the oil to penetrate for approximately 20 minutes before wiping away any excess oil. This is very important, as leftover oil may otherwise create glossy spots that can also become sticky.
  3. Once the entire floor has been treated, you may buff it using a floor polishing machine fitted with a fine polishing pad. This produces a very attractive and durable finish.

The floor can be maintained using cold floor oil, which is buffed into the surface. Only a small amount of oil, 10–15 ml per square meter, is required for this treatment. Under normal wear, maintenance is typically needed every 2–3 years.

The refining process allows the oil to withstand high temperatures, making application safe and free from emissions. Heat changes the oil's viscosity, allowing it to penetrate deeper while any surface moisture evaporates.

For complete specifications and application instructions, please refer to the separate PDF document.

WARNING: Risk of spontaneous combustion! Cloths and porous materials soaked with linseed oil should be burned, dried in an open, non-flammable location, or stored submerged in water before disposal.

Made in Sweden
The product is manufactured in Uppsala using the highest-quality raw materials.

  • ✓ We ship world wide!
  • ✓ 30 days return policy
  • ✓ Personal support