Classic shoe rack with side ends in nickel-plated brass and round rods in untreated oak. The rods are 115 cm (45.3 in.) long but can easily be cut to the desired length. We recommend treating the wood with linseed oil or linseed oil wax to protect against moisture and stains.
Mounting Instructions: Mark the screw holes at both ends of your dowel, then pre-drill a 15 mm (0.59 inches) deep hole with a 2 mm (0.08 inches) wide drill bit. Screw in the slot screw by hand with a screwdriver and stop when you feel it "tightens" in the screw and that it fits nicely in the countersunk hole. The screw should not be forced further down than necessary as it may break.
The depth of the rack is 30 cm (11.8 in.) and the diameter of the rods is 25 mm (0.984 in.).
This rack is available in several different designs. If you would like a design combination that is not shown on the website, please contact usto place an order.
