Classic shoe rack featuring side ends in unlacquered brass and round rods in untreated oak. The rods are 80 cm (31.5 in.) long but can easily be cut to the desired length. The depth of the rack is 30 cm (11.8 in.) and the diameter of the rods is 25 mm (0.984 in.).
Mounting Instructions: Mark the screw holes at both ends of your dowel, then pre-drill a 15 mm (0.59 inches) deep hole with a 2 mm (0.08 inches) wide drill bit. Screw in the slot screw by hand with a screwdriver and stop when you feel it "tightens" in the screw and that it fits nicely in the countersunk hole. The screw should not be forced further down than necessary as it may break.
This shoe rack is available in several designs. If you would like a design combination that is not shown on the website, please contact usto place an order.
